Electrical training is essential for anyone hoping to fix electrics around the home. DIY electrics can be very dangerous, and without basic electrical training, you could be putting yourself, your home and its inhabitants in danger!
Even non-electrical DIY tasks around the house require a certain amount of electrical care and knowledge if you want to perform them safely. Installing shelves, trimming hedges and sanding floors; all of these tasks and more require a basic understanding of electrical safety – which electrical training can give you.
If you are keen on your DIY and want to expand your knowledge while improving your safety, electrical courses for beginners can be a really good idea. In the meantime, here are a few very important electrical safety tips for you which have been put forward by the Electrical Safety Council:
• Always use a Residual-Current Device (RCD)
If you don’t know about RCDs, you need to invest in a little electrical training. RCDs can save your life if you make a mistake with your electrics. They are devices which are installed at your socket. If the piece of equipment which you are using becomes faulty or malfunctions, the RCD will immediately cut off the supply of electricity, potentially saving your life.
• Inspect your Cables
Before using any piece of equipment, make sure that the cable is undamaged. Check that there is no fraying, no dirt and no damage which could make using the appliance dangerous.
• Never Work in the Wet
You shouldn’t need specialist electrical training to know this, but you should never use or work with electricity in wet conditions. As your basic school science lessons should have told you, water conducts electricity which means it is far more likely to result in electrocution.
• Store Equipment Safely
A good electrical training course should teach you to look after your equipment carefully. Electrical equipment needs to be stored safely in a dry place. If water is allowed to get into your tools, it could cause water damage and could also cause them to malfunction, making them very dangerous to their users.
• Buy from a Trusted Manufacturer
If you enrol in an electrical training course, you will be taught about which makes, models and manufacturers to trust. Not all machines, appliances and tools are made to the highest possible standard, and it is important that you know a little about which machines are prone to malfunctions. If you are buying any equipment from a second-hand dealer, make sure that they have a good reputation and are selling you quality goods.
• Wear Rubber Soled Shoes
This might sound like a bit of a ridiculous precaution but, if the worst should happen, rubber-soled shoes could save your life. Rubber soles are terrible conductors of electricity which stops you from being grounded and therefore being severely electrocuted.
If these tips are of interest to you, and you are planning on doing some electrical DIY, you might like to look into getting some DIY electrical training. This will help you learn more about how to work with electricity in your home and to stay safe at the same time. Electricity is a very dangerous force but, if you’ve had the appropriate electrical training, you will be able to deal with it with confidence and care.
from
https://summerblakeley.wordpress.com/2019/10/26/dont-try-this-at-home-electrical-training-for-diy-electricians/
No comments:
Post a Comment